|
Typical Maximum Receiving Range:
|
1 up to 20 miles line of sight
|
|
Dimensions:
|
7" x 4" x 5" (17.8 x 10.0 x 12.7 cm)
|
|
Weight:
|
Less than 2 lbs. (750 gm)
|
|
Material:
|
Pressure controlled, airtight, and watertight case (Pelican case)
|
|
Power Supply:
|
10 to 15 VDC
|
|
External Adapters:
|
AC power (110 Volt adapter included) Car adapter (fused cigarette lighter cord included)
|
|
Internal Batteries:
|
Rechargeable 10-AA cell Nicard batteries ( 6 to 8 tracking hours on full charge)
|
|
Operating Temperature:
|
4 degrees to 158 degrees F (-20 degrees to 70 degrees C)
|
|
Operating Humidity:
|
0-95% relative humidity non-condensing
|
|
Receiving Frequency:
|
150-225 MHz (Other bands available upon request)
|
|
Noise Figure:
|
2.5 dB or better
|
|
Input Impedance:
|
2.5 dB or better
|
|
Frequency Stability:
|
+/- KHz maximum (at operating temperature)
|
|
Image and Spurious Rejection:
|
60 dB or better
|
|
Minimum Discernible Signal:
|
-150 dBm (.007 microvolts or better)
|
|
Circuit Design:
|
Modern dual conversion superthetrodyne circuit with 8-pole crystal filter and 40 dB AGC range
|
|
Manual Gain Range:
|
90 dB or better
|
|
Frequency Readout:
|
Digital, direct reading in 1KHz steps; analog delta tune +/- 2 KHz center frequency
|
|
Tuning:
|
Three-digit, dust resistant, push-wheel switches control digital quarta-locked PLL synthesizer
|
|
Frequency Reset Ability:
|
To +/- 500 KH
|
|
Signal Metering:
|
0 to 1 scale meter with high dynamic range circuit and backlit for night tracking. LED
indicator gives linear signal strength-to-brightness response for night use
|
|
Noise Banking Circuit:
|
Removes most impulse and ignition noise tracking in difficult conditions
|
|
Antennas Available:
|
Omni (Non-Directional), Yaggi (Directional), Loop (Directional)
|
Ordering Information
|
|
Please Contact Us for ordering and current pricing information.
|
